Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A.

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Correction: Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies.

[This corrects the article DOI: 10.1039/D2RA08312D.].

Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies.

Zeolitic imidazolate framework ZIF-8, a type of metal-organic framework, has diverse applications in multiple catalytic fields due to its outstanding properties. Herein, ZIF-8 photocatalysts with three different morphologies (dodecahedral, pitaya-like, and leaf-like) are successfully synthesized under ambient conditions from zinc salts by altering the volume ratio of methanol and water used as a solvent. The as-synthesized ZIFs have high crystallinity with distinct BET surface areas. The experiments indicate that the ZIFs have high photocatalytic efficiency, in which the leaf-like structure (ZIF-8-F3) is the most efficient in the degradation of reactive black KN-B dye (RB5) under 365 nm UV irradiation. This is due to the efficient inhibition of electron-hole recombination or the higher migration of charge carriers in ZIF-8-F3, thus producing more reactive oxygen species, resulting in greater photocatalytic efficiency. At pH = 11, more than 95% of RB5 is degraded within 2 hours when using 1.0 g L-1 of ZIF-8-F3. Besides, the photocatalytic and kinetic performances of ZIF-8-F3 are also investigated by optimizing the pH, initial RB5 concentration, and dosage of the used catalyst. These ZIF-8-F3 plates have been shown to be a promising material with high photostability and effective reusability, beneficial to various potential applications in environmental remediation issues.

Nanotechnology-based drug delivery for central nervous system disorders.

Drug delivery to central nervous system (CNS) diseases is very challenging since the presence of the innate blood-brain barrier (BBB) and the blood-cerebrospinal fluid barrier that impede drug delivery. Among new strategies to overcome these limitations and successfully deliver drugs to the CNS, nanotechnology-based drug delivery platform, offers potential therapeutic approach for the treatment of some common neurological disorders like Alzheimer's disease, frontotemporal dementia, amyotrophic lateral sclerosis, Parkinson's disease, Huntington's disease. This review aimed to highlight advances in research on the development of nano-based therapeutics for their implications in therapy of CNS disorders. The challenges during clinical translation of nanomedicine from bench to bed side is also discussed.

Influence of Chitosan-Based Carbon Dots on Astaxanthin Production of Green Alga Tetraselmis sp.

CDs are carbon fluorescent nanomaterials that have gained significant attention in recent years owing to their unique properties. In this work, we utilized a simple solution to produce CDs with func-tionalized amino groups via a one-step carbonization from a chitosan precursor. This simultaneous approach does not use special reagent for either the formation step or the amino-functionalization step of CDs. The as-prepared amino-functionalized CDs that possesses expected characteristics, such as nano-size distribution, monodispersible, high blue light emission, high absolute quantum yield of 5.52%, and functionalized amino groups on the surface. Furthermore, this work demonstrated the low cytotoxicity and high biocompatibility of the CDs, through the improvements in the astaxanthin production of alga Tetraselmis sp. (more than doubled (up to 0.044 mg/L), relative to the control). Thus, as-prepared CDs have promising properties not only for applications in bioimaging, drug delivery or sensors, but also as promoter in algal biorefinery.

Magnesium Aminoclay (MgAC) as an Additive in Anti-Icing Mixture of Propylene Glycol Applied to Railway Electrical Wires: A Preliminary Study.

Ice accumulation on the surface of railway electrical wires can cause significant problems in the winter season. Different anti-icing liquids have been used to prevent the formation of ice on different surface substrates. The most common anti-icing liquids are ethylene glycol mixtures. Recently, propylene glycol, due to its lesser toxicity, has been considered as an alternative anti-icing agent. However, propylene glycol mixtures have some limitations, in that their degradation can lead to corrosion of the metal substrate. As detailed in the literature, (3-aminopropyl)-triethoxysilane (APTES), the precursor of magnesium aminoclay (MgAC), has been used to protect metal substrates from corrosion. In the present study we examined the potential of MgAC as an APTES-alternative additive in propylene glycol mixtures. The results showed that the anti-icing properties of the propylene glycol mixtures were maintained in the presence of MgAC (at 0.1, 0.5, and 1.0 wt.% concentrations). Furthermore, MgAC's potential as a thickening agent was shown in the increased viscosity of the propylene glycol/MgAC mixtures relative to the propylene glycol mixtures. The addition of MgAC also rendered the propylene glycol mixtures more hydrophilic. However, MgAC addition also led to corrosion due to the excess amounts of amine groups in the anti-icing solution. In this paper, the corrosion mechanism of MgAC is explained in the paper. In the future, the anti-icing and anticorrosion properties of propylene glycol/MgAC mixtures at low concentrations (<0.1 wt.%) should be more fully investigated.

Microalgal ecotoxicity of nanoparticles: An updated review.

Nowadays, nanotechnology and its related industries are becoming a rapidly explosive industry that offers many benefits to human life. However, along with the increased production and use of nanoparticles (NPs), their presence in the environment creates a high risk of increasing toxic effects on aquatic organisms. Therefore, a large number of studies focusing on the toxicity of these NPs to the aquatic organisms are carried out which used algal species as a common biological model. In this review, the influences of the physio-chemical properties of NPs and the response mechanisms of the algae on the toxicity of the NPs were discussed focusing on the "assay" studies. Besides, the specific algal toxicities of each type of NPs along with the NP-induced changes in algal cells of these NPs are also assessed. Almost all commonly-used NPs exhibit algal toxicity. Although the algae have similarities in the symptoms under NP exposure, the sensitivity and variability of each algae species to the inherent properties of each NPs are quite different. They depend strongly on the concentration, size, characteristics of NPs, and biochemical nature of algae. Through the assessment, the review identifies several gaps that need to be further studied to make an explicit understanding. The findings in the majority of studies are mostly in laboratory conditions and there are still uncertainties and contradictory/inconsistent results about the behavioral effects of NPs under field conditions. Besides, there remains unsureness about NP-uptake pathways of microalgae. Finally, the toxicity mechanisms of NPs need to be thoughtfully understood which is essential in risk assessment.